View UPA810T-T1-A_1331805.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRELIMINARY DATA SHEET SILICON TRANSISTOR
UPA810T
NPN SILICON HIGH FREQUENCY TRANSISTOR
FEATURES
* * * * * SMALL PACKAGE STYLE: 2 NE856 Die in a 2 mm x 1.25 mm package LOW NOISE FIGURE: NF = 1.2 dB TYP at 1 GHz HIGH GAIN: |S21E|2 = 9.0 dB TYP at 1 GHz EXCELLENT LOW VOLTAGE, LOW CURRENT PERFORMANCE HIGH COLLECTOR CURRENT: 100 mA
0.65 2.0 0.2 1.3 2 5
OUTLINE DIMENSIONS (Units in mm)
PACKAGE OUTLINE S06 (Top View)
2.1 0.1 1.25 0.1
1
6 0.2 (All Leads)
3
4
DESCRIPTION
NEC's UPA810T is two NPN high frequency silicon epitaxial transistors encapsulated in an ultra small 6 pin SMT package. Each transistor is independently mounted and easily configured for either dual transistor or cascode operation. The high fT, low voltage bias and small size make this device suited for various hand-held wireless applications.
0.9 0.1 0.7 0.15 - 0.05
+0.10
PIN OUT 1. Collector Transistor 1 2. Base Transistor 2 3. Collector Transistor 2 4. Emitter Transistor 2 5. Emitter Transistor 1 6. Base Transistor 1
0 ~ 0.1
Note: Pin 3 is identified with a circle on the bottom of the package.
ELECTRICAL CHARACTERISTICS (TA = 25C)
PART NUMBER PACKAGE OUTLINE SYMBOLS ICBO IEBO hFE1 fT Cre2 |S21E|2 NF hFE1/hFE2 PARAMETERS AND CONDITIONS Collector Cutoff Current at VCB = 10 V, IE = 0 Emitter Cutoff Current at VEB = 1 V, IC = 0 Forward Current Gain at VCE = 3 V, IC = 7 mA Gain Bandwidth at VCE = 3 V, IC = 7 mA Feedback Capacitance at VCB = 3 V, IE = 0, f = 1 MHz Insertion Power Gain at VCE = 3 V, IC =7 mA, f = 1 GHz Noise Figure at VCE = 3 V, IC = 7 mA, f = 1 GHz hFE Ratio: hFE1 = Smaller Value of Q1, or Q2 hFE2 = Larger Value of Q1 or Q2 GHz pF dB dB 0.85 7 UNITS A A 70 3.0 120 4.5 0.7 9 1.2 2.5 1.5 MIN UPA810T S06 TYP MAX 1.0 1.0 250
Notes: 1. Pulsed measurement, pulse width 350 s, duty cycle 2 %. 2. The emitter terminal should be connected to the ground terminal of the 3 terminal capacitance bridge. For Tape and Reel version use part number UPA810T-T1, 3K per reel.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Date Published: June 28, 2005
UPA810T
ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS VCBO VCEO VEBO IC PT PARAMETERS Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current Total Power Dissipation 1 Die 2 Die Junction Temperature Storage Temperature UNITS V V V mA mW mW C C RATINGS 20 12 3 100 110 200 150 -65 to +150
TJ TSTG
Note: 1.Operation in excess of any one of these parameters may result in permanent damage.
ORDERING INFORMATION (Solder Contains Lead)
PART NUMBER UPA810T QUANTITY Loose Products (50 pcs) PACKAGING Embossed tape 8mm wide. Pin 6 (Q1 Base), Pin 5 (Q1 Emmitter) Pin 4 (Q2 Emitter) face to perforation side of tape
UPA810T-T1
Taping products (3 KPCS/Reel)
ORDERING INFORMATION (Pb-Free)
PART NUMBER UPA810T-A QUANTITY Loose Products (50 pcs) PACKAGING Embossed tape 8mm wide. Pin 6 (Q1 Base), Pin 5 (Q1 Emmitter) Pin 4 (Q2 Emitter) face to perforation side of tape
UPA810T-T1-A
Taping products (3 KPCS/Reel)
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPA810T-T1-A

	To Download UPA810T-T1-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .